|
Title: WBA 11SS cash can hard to remove Post by: 89chevyman on November 24, 2013, 12:14:58 AM Basically I have 2 CDS machines with WBA 11SS installed. I have one can that slips in and out easily in either machine (without having to pull the machine over) but, the other two seem to hang up. Can anything be done to make removal easier? Hammer, grease or large 2X4? Thanks.
Chris Title: Re: WBA 11SS cash can hard to remove Post by: qbert on December 25, 2013, 07:51:42 PM If one can slides in to both machines easily then the issue is with the can. Carefully compare the two cans look for rubbing on the bad can and easily bend the distorted (hard to install can) to match the good one a small hammer. Use very light blows (be careful by where the gears are as athey are plastic. Or replace the can completetly they are not too expensive. If the problem is with the machine the cash can frame is probably tweeked from the machine being moved many times before it got to it's current home. Again inspect the can to show where rubbing is occuring and adjust the frame accordingly.
I had a machine that had similar problems and a new cash can solved it for me. Rich |