|
Title: game maker touch screen problem Post by: brooker on November 27, 2013, 11:42:47 AM I have tried the Safe Clear a few times as well and the touch screen configuration never appeared.
Title: Re: game maker touch screen problem Post by: rslots on November 28, 2013, 02:47:09 AM Was touch screen working before the safe RAM clear? One way to tell if the touch screen is sensing input is the LED on the controller will momentarily dim whenever you touch the screen . What machine do you have ? Upright or slant top? 13" monitor or 20" monitor?
Title: Re: game maker touch screen problem Post by: brooker on November 28, 2013, 02:50:40 PM i get the machine from a friend. i dont know if the touch screen working before..the machine iis a ballygame maker 7000. with 13 monitor...how i know if the touch is good o bad
Title: Re: game maker touch screen problem Post by: rslots on November 28, 2013, 05:22:31 PM You should be able to unplug the monitor then pull it forward and tilt the top toward you so you can see inside and then line up the connector opening so you can re-plug it in. Then turn on the machine and check the touch screen controller to first see if it is even lit up. It should have a green or red LED like show in the attached picture. If it is working properly the LED will momentarily brighten when you touch the screen. If that happens, then you know the touch screen and controller are responding properly so problem must be elsewhere (like possibly the MPU). If the LED is not lit or does not change brightness when you touch the screen, then there may be a problem with the touch screen or the controller or else maybe it is not getting power (if not lit at all).
|