New Life Games Tech Forums

**Reel Slots** Gaming Machines => IGT S2000 and Vision Games. => Topic started by: mah on December 11, 2013, 03:26:31 PM



Title: Bonus Reel Disconnected Error Message
Post by: mah on December 11, 2013, 03:26:31 PM
Have a Freedom Stars I installed in a previous 3 reel cabinet and I'm getting the error message above.

I searched and found the following thread:

http://newlifegames.net/nlg/index.php?topic=236.0 (http://newlifegames.net/nlg/index.php?topic=236.0)

Can someone please elaborate on the I/O grounding procedure?

I follow installing the jumper but I'm not sure how to go about grounding the pin of the cabinet I/O board.  I assume the pins are marked somehow?

Thanks,

Mike



Title: Re: Bonus Reel Disconnected Error Message
Post by: coorslight115 on December 11, 2013, 05:09:23 PM
http://newlifegames.net/nlg/index.php?topic=11362.msg98628#msg98628 (http://newlifegames.net/nlg/index.php?topic=11362.msg98628#msg98628)

This is a step by step I did a few years ago. Sounds like the jumper for the two green wires by the cabinet i/o card were not jumpped together. picture in second post of the instructions


Title: Re: Bonus Reel Disconnected Error Message
Post by: mah on December 11, 2013, 08:07:36 PM
Is installing the jumper the only thing that needs to be done?

The way I read it it sounded like installing the jumper and grounding the I/O pin were two separate things.

Thanks for the reply.

Mike


Title: Re: Bonus Reel Disconnected Error Message
Post by: coorslight115 on December 11, 2013, 08:28:21 PM
Is installing the jumper the only thing that needs to be done?

The way I read it it sounded like installing the jumper and grounding the I/O pin were two separate things.

Thanks for the reply.


Jumping this was all I did. look at the post, it is step by step on how I converted a three reel to a 3 reel plus bonus reel.




Fixed a broken quote box.  -knagl


Title: Re: Bonus Reel Disconnected Error Message
Post by: coorslight115 on December 13, 2013, 01:27:32 AM
Is installing the jumper the only thing that needs to be done?

The way I read it it sounded like installing the jumper and grounding the I/O pin were two separate things.

Thanks for the reply.

Jumping this was all I did. look at the post, it is step by step on how I converted a three reel to a 3 reel plus bonus reel.

Mike

Did that fix it???