New Life Games Tech Forums

Hi guys, I am in need of an upper 5 button hole panel for an Gameking to Igame conversion. It is the upper piece in the picture circled in red. Mine is blank with only the two right sided butttons.

Thanks Bruce

I have one from my game king upright 17" I was going to install it but I sold it and got a slant top instead and never used it. It's complete all but the I/O plate. $20.00 plus shipping. You have to get another 802 I/O and a jumper harness that goes from one I/O to the other.

Dale

First off someone had better determine what he has before you can recomend what he needs. Take a look at these pictures and see if you can find anything that looks even close to a 802 IO

Please take some pictures of the machine that you have so we know what parts you are going to need I have the button panel if its a 17" machine so we can see what parts that your going to need to get it working. Buzz I have two 802 I/Os in my slant top I-Game and my double button panel works just fine so I figured that he would need two to make the second panel work.

Dale

Thanks guys will take some pics in the morning. I noticed inside the machine, there are additional buttons internals with lights rubber banded together. I am just learning and have been reading about the dual I/O needed for 10 button decks, so I will take some pics inside and look forward to everyone helping me play with this machine. It was a badly beat up game king cosmetically and I have a 19" game king, so I thought I would turn it into a dedicated video slot since I dont have one.
I have fixed the cosmetics for the most part.

I also am on the look out for the trim for this roundtop that was damaged. I am speaking of the wooden piece that has the plastic chrome like arc that dresses up the top portion of the cab and holds the top of the top glass in.  Mine was very badly damaged.

OK The first pictures I posted is a 5 button deck NO 802 type IOs.  Top pic. here is a Factory I Game with a 10 button deck (2) IOs   Bottom pic. is a 5 button deck converted to a 10 button (1) IO ( notice it's not even in a holder.)

smileman83  The bottom line is, if you have a 10 button deck your not going to use it.  Oh I know the 10 buttons look COOL. Most people will hit the MAX bet button and the machine will play all lines with MAX credits. That game finishes hit MAX bet again. The first pic. I posted of a 5 button deck that machine has Pink Panther in it, the 10 button next to it has Cops N Donnuts. There is a total of (7) I Games/Game Kings is my living room (4) with 10 buttons and (3) with 5 button decks. The only buttons that are ever used is the MAX Bat or the SPIN buttons.

You know I think youre right and it would way easier to just keep it as is. The question is should I find a better one without the chrome rubbed off or just use this one and have it replated locally.

Buzz - that's because you don't play i-Games!   :72-  When's the last time you pressed one of those buttons?   :96-  :Dave

So I took some pics of the game and it looks as if there are two I/o assuming these are the metal things that look like little hard drives in the holder in the top left of the cabinet. The extra buttons appear to come right from that area, but I dont know if there are any other wiring parts that woul be needed. Cartman says he has a button panel and that sounds great, but I want to make sure of anything else I need.

Lastly, since this was a poker machine, what legends would I be looking for, for the new buttons, or Cartman, does your panel have the buttons and legends already on? Also shouldnt I change out the far right button that says deal, to something related to spin since this will be a slot?