|
Title: IGT AVP touchscreen comm fail Post by: jbuchanan on December 21, 2013, 06:58:16 PM Does anyone know what to do with touchscreen comm fail on IGT AVP Gameking. Checked VGA cables,monitor is good, and tried new power supply.
Title: Re: IGT AVP touchscreen comm fail Post by: brianfink on December 22, 2013, 05:02:39 AM Check the black molex plug inside the machine and the one on the monitor chasis that plugs into the machine for any bent or pushed back pins. Make shore you reseat the monitor as far back as it will go.
Title: Re: IGT AVP touchscreen comm fail Post by: harp on December 22, 2013, 08:58:31 AM Did the Touch Screen just stop working, did you by chance change the BV or Printer?
Using an RS232 BV or Printer will bring down Netplex which the Touch Screen is part of Title: Re: IGT AVP touchscreen comm fail Post by: jbuchanan on December 22, 2013, 03:20:28 PM didn't change out bv or printer, just stopped working, will check the plugs again. would disabling bv or printer clear the error possibly?
Title: Re: IGT AVP touchscreen comm fail Post by: brianfink on December 22, 2013, 10:51:42 PM Try pushing the selftest button on the MPU then turn your jackpot key this should bring up touch screen calibration try to re calibrate.
|