|
Title: IGT S2000 error Post by: kwhite on December 22, 2013, 05:28:52 PM I have a IGT S 2000 with a open MB, Paper out error that won't clear. Anyone have any Ideas
Kathy Title: Re: IGT S2000 error Post by: Styx on December 22, 2013, 06:34:23 PM Open MB are your open doors. Do they close when you close them? If all doors are closed, you only have the paper out error?
Try opening and closing the main door a few times, and moving the latch up and down a few times when you close it. That might clear it before you try anything else. For the printer error if it still won't clear, I try a mix of the following things: Make sure there is enough paper, fill paper, pull out and re-seat the printer, with or without paper. Re-feed the paper to the printer, hold down the feed button until it sends a ticket out. Reseat the BV. Close all doors and move the latch up and down a few times again, just to be sure. Power cycle the printer. Power cycle the machine. -Styx Title: Re: IGT S2000 error Post by: kwhite on January 27, 2014, 04:03:51 PM I got the printer to work. But doors are still not. They are closed. I think I will replace the switch on door
|