|
Title: Bally E2308-1 Post by: flyingfred on December 23, 2013, 03:46:54 AM I am a new owner of a Bally E2308-1 machine. I am experiencing a tilt problem and I will be researching fixes on this forum.
Merry Christmas to everyone here!! -Fred- Title: Re: Bally E2308-1 Post by: flyingfred on January 06, 2014, 04:12:04 AM Thanks to Foxes Slots replacement hopper board, my hopper now pays out as it should. I still get a tilt on the first play after the machine is unplugged for a while as it lets the 3 and 4 reel keep spinning. When I push the reset, all is good. I had tilt problems before when the hopper board was bad when I would push the cash out button. This is no longer an issue.
-Fred- Title: Re: Bally E2308-1 Post by: CVslots on January 06, 2014, 04:15:57 AM Barry fix is one if the BEST! :89-
Title: Re: Bally E2308-1 Post by: ramegoom on January 09, 2014, 01:04:19 AM What I found in several of my E2000 series machines is: If the moving parts within the reel mechanism become sluggish due to grease "caking", you will see occasional tilts. The reels need to spin evenly. Also, the piston cup in the damper, if it's not working properly, you can tilt the machine. Replace the cup and OIL it, don't use grease.
|