|
Title: Back glass flaking... Post by: Randy0777 on April 20, 2009, 02:55:26 AM I've had this pinball for over ten years and was lucky to find a backglass about seven years ago. The first one started flaking after a year or two. This one is starting to "come loose" from the glass( look at the top X) Was wondering how I can slow this down :103- I installed the low wattage bulbs and only have it on when people want to play
Title: Re: Back glass flaking... Post by: cfh on April 20, 2009, 08:25:42 AM I've had this pinball for over ten years and was lucky to find a backglass about seven years ago. The first one started flaking after a year or two. This one is starting to "come loose" from the glass( look at the top X) Was wondering how I can slow this down :103- I installed the low wattage bulbs and only have it on when people want to play I spray all my pinball glasses with Krylon "Triple Thick" to preserve them. It's a "hot" lacquer based product, and help keep everything in place. The problem though with bally glasses is that often they try and delaminate in "sheets". This makes re-adhesion more difficult. Spray very "wet" coats too. I usually do 2 wet coats. Title: Re: Back glass flaking... Post by: Randy0777 on April 20, 2009, 06:16:13 PM Thanks again Clay,I'll give it a try.
|