|
Title: Vision Problem Post by: triplediamond on January 01, 2014, 07:00:24 PM Hi all,
Moved the vision today from 1 room to another....upright the whole time ..opened door to turn on ,boots up,reels spin comes up with error Imputs shorted ....found thread on this ...checked wires for short ,changed out door IO board still the same ....any ideas ? Thanks Eric Title: Re: Vision Problem Post by: stayouttadabunker on January 01, 2014, 07:09:49 PM Something's still loose from moving...
With the power off, unplug connectors and re-plug them back together. Same goes for the I/O boards as well. Title: Re: Vision Problem Post by: triplediamond on January 01, 2014, 07:36:56 PM That was it.. I got it working ....I couldn't tell you where it was ....Just started reseating connections...These machines are sensitive ...I take extra care when moving them ...I use a computer chair for transport, its just the right height to slide off of one stand and then onto another .......Thanks for your help Mark ,...I appreciate the fast reply
Eric Title: Re: Vision Problem Post by: stayouttadabunker on January 02, 2014, 12:37:19 PM HEy! It's working? Awessome!! :3-
|