|
Title: Bally e1000 Golden Continental Tilt Mode Post by: skiz on January 02, 2014, 04:55:57 PM Hi, I have a problem with a Bally Golden Continental. It is a French version with no hopper.
When I turn on the machine, it goes directly in Tilt mode. I can do the different tests but it does not give me any error code... The machine only shows a 50 code when I open the door. I have check the door switches but it doesnt change anything. What can I do ? Any help will be appreciated. thanks Jordan Title: Re: Bally e1000 Golden Continental Tilt Mode Post by: skiz on January 03, 2014, 10:15:17 AM Is it possible that the Ram 5101 is broken ? Or it has no effect on the machine (50 error code) ?
Title: Re: Bally e1000 Golden Continental Tilt Mode Post by: dhellis on January 03, 2014, 11:42:23 PM Perhaps the best place to start is by checking the power supply voltages and make sure those are correct.
France also uses 220VAC so make sure that the power transformer is set up for 110 VAC. Bad RAM chips should give you either a 1, 2 or 6 error (in the 6th digit place) |