|
Title: Enhanced Board Battery Test Post by: scratchee35 on January 03, 2014, 04:16:44 AM Hey everyone...
ive recently had issues with 3 enhanced boards, all displaying the "NETPLEX LINK DOWN"... After reading every article on here, most refer to the green battery not being at 3.6v...i tested mine, and all tested at 3.5, 3.6 or 3.7 then i realized that i had not popped the 3.0v battery....as soon as i did that, the green battery dropped to 2.4-2.6volts...which clearly isnt enough to run the board i replaced the battery, and no problems...all 3 boards work without any problems!!! not sure if that has been a problem with others, but it sure was with mine... just my 2 cents!!! Steve |