|
Title: MARS Bill Validator ????? Post by: ruttrunner1 on April 21, 2009, 12:15:49 PM I accidentally unselected the bill acceptor in MMS and to enable it again I need to enter a four digit hexadecimal value. I have tried E489 but it does not work for me. Does anyone know of any other values that might work. I looked on the unit itself thinking it would be printed on it but nothing obvious.
Thanks, Title: Re: MARS Bill Validator ????? Post by: enforcer on April 21, 2009, 01:48:54 PM Don't have an answer for you, but did you try Robert Winter's Odyssey Slot page in their forum section under tech issues ? If you go to: www.robertwinter.com/slot/odyssey/forum it should take you there. Good luck...
enforcer Title: Re: MARS Bill Validator ????? Post by: ruttrunner1 on April 21, 2009, 02:01:51 PM He has a great site dedicated to Odyssey machines. That is where I found the E489 value that I tried but it does not match my validator. I sent him an email and am hoping he might know of some other values to try.
Title: Re: MARS Bill Validator ????? Post by: ruttrunner1 on April 24, 2009, 12:06:08 PM I was able to figure this out.
Odyssey actually provides this value for you in the error log. It can only be seen if you go to the error log right after performing a safe clear. It will no longer be visible if you turn the reset key or power off the machine. Long Live Odyssey. :3- Title: Re: MARS Bill Validator ????? Post by: StatFreak on April 24, 2009, 05:28:08 PM Thank you for posting the solution that you found. It might help another member facing the same issue in the future. K+ to you. :3- :3-
Title: Re: MARS Bill Validator ????? Post by: robertwinter on April 29, 2009, 05:50:19 AM I'm glad you found the answer. I only knew of the E489 value.
|