New Life Games Tech Forums

Right now I have a cheesy piece of paper with 1 led showing different denominations - I'd like to get everything I need to add the touch denim functionality

EDIT: Thanks RB

Brian  Need to ask a couple of questions. Does the touch panel you now have work ?? If so then all you need is a ledgen that tells you what denominations you have selected. If it doesn't work you can always use a button for the Multi denom in place of the touch panel. I'm sure I'm one of the very few on this site that prefers the button over the touch panel. If your machine has a block off plate just to your right of the MAX Bet button, your machine will already be wired for a Multi Denom button.

If your going to install Multi Denom your going to need a clear and key chip. ( for sure a key chip )

I don't have the touch panel now - just a single led display. I have the button and wanted to convert to the touch panel. :) I have the clear and key chips already.

i was just on Rudy's...John has a complete one on his site under igt

S

Thanks, but I see "Availability: OUT OF STOCK"

I've never purchased from this seller, but he mentions he has multiples and are new.
http://www.ebay.com/itm/IGT-S2000-Slot-Machine-Multi-Denomination-Touch-Pad-Cell-Sensor-with-Harness-/251421458803?pt=LH_DefaultDomain_0&hash=item3a89e30173 (http://www.ebay.com/itm/IGT-S2000-Slot-Machine-Multi-Denomination-Touch-Pad-Cell-Sensor-with-Harness-/251421458803?pt=LH_DefaultDomain_0&hash=item3a89e30173)

I have bought many items from this seller . She is a fast shipper  and reputable seller you will not be disappointed . P.B.

I think before he gets all happy buying parts we need to find out what setup his machine has. Having a single LED on the denom window doesn't guarantee that he has the required 663 display and can just add a touchpad to be up and running. He has a button for changing the denom now so I would lean more toward there being a 552 display. Either way, we need to find out so he can order ALL the parts he needs. A couple picks of the display and how many digits the credit display is capable of would be very helpful as would a couple good pics of the inside of the door

Agreed .Cowboy its as simple as counting the number of leds on the panal when the machine is on .P.B.

If he can see them through the decal. He'd previously stated "single LED" and that's what got my attention

Thanks for the specific questions. I currently have a 552 display. Attached are some pics of my machine.

multi deno going to work with coin in?   I  see he  has no ticket unit

I do have a printer, just no bezel. Thanks to the kindness of another forum member, one is on the way.

To use a touchpad on that you'll need to convert to a 663 display and harness setup. It's actually going to take several parts and could be a little pricey depending on where you get them and what kind of deal they might offer. Talk to one of the sellers on the homepage and tell them you want to convert a 552 short reel glass display to 663 with touchpad and need all necessary parts. Other than the machine itself you don't currently have anything that's going to help you reach your goal. Both times I did this I just looked till I found a deal on a complete used replacement door that had what I needed.

I think cowboy is right getting  a door might be easyest , fastest, cheapest  way to go imo

Thank you for the advice.


I agree!

I have everything you need to convert it. Parts are all brand new except the VFD which didn't come with it when I bought it. I added the VFD (new style) no controller board needed. I also have the harness adapter to use it with your existing harness. You will need a key chip for sure if you don't already have one. Clear chip also recommended. PM or email me if you are interested.
RB

This is the adapter for your harness.