Title: Help PLEASE Ainsworth Aristocrat Post by: ezazz on January 14, 2014, 11:36:26 PM I have recently aquired an old one arm bandit slot Australian 20c machine its called the Boomerang
I managed to get most parts working after a but of tinkering but still have a few bugs to work out, currently i have managed to get it to light up and have most the mechanics working however i need some help with 1/ when i insert a coin and pull the lever all 4 reels spin but then the actuators do not activate automatically to stop them ( with the door open i can hit the reset button and they all lock into place and hopper spins to pay out) 2/ the hopper will pay on every spin regardless of what is on the reels and wont stop paying until it times out and red led for the security button comes on i havent been able to find much info on these slots and this is my first one so any help would be greatly appreciated Title: Re: Help PLEASE Ainsworth Aristocrat Post by: ezazz on January 15, 2014, 05:17:07 AM Pic 1
Title: Re: Help PLEASE Ainsworth Aristocrat Post by: ezazz on January 15, 2014, 05:19:30 AM Pic 2 ,3 and 4
Title: Re: Help PLEASE Ainsworth Aristocrat Post by: David B Fowler on January 15, 2014, 12:36:45 PM Looking at the board, in the top left corner there is a blue ribbon cable that appears to have gotten hot on the first line. It looks a little brown and that might be an issue. Might not be making contact at the board or socket. Check for cold soldier connections as well.
Dave F Title: Re: Help PLEASE Ainsworth Aristocrat Post by: Mr. Dinoman on January 15, 2014, 01:50:21 PM also looks like the board around the relay just above r6 is burned...Check all connections for continuity...
Jimmy Title: Re: Help PLEASE Ainsworth Aristocrat Post by: ezazz on January 16, 2014, 03:54:59 AM Thanks for the tips guys, replaced 2 caps that were testing low and one that had a broken leg, did some further investigating and managed to find on the board to the right that the blue ribbon cable fixes to that one of the little black chips was very hot .... what do these chips do and how would i go about fixing, or finding a replacement ? i feel like im starting to sound a little dumb, im an Aussie Electrician so i think im up to the task, however have pretty limited knowledge of electronics..
azz Title: Re: Help PLEASE Ainsworth Aristocrat Post by: David B Fowler on January 16, 2014, 04:26:45 AM Usually these type of connections create heat because they make intermittent contact that causes a spark which overheats the wire so it burns and looses connection. Repair the cold solder joints and connections and that at lease will get you heading on the right direction.
Dave f. |