|
Title: WTB - IGT Bill validator bezel, bill guide, 10 switch GK door harness & more Post by: jiggywithit on January 18, 2014, 10:40:32 PM Just got a Game King - some things are broken and needs repair. Looking for the following:
Title: Re: WTB - Bill validator bezel & bill guide Post by: Buzz on January 19, 2014, 12:10:58 AM The bezel you are calling yellow, I thought they were green, Anyway I've always had a hard time finding them. most times they used black ones. I've found if you have a green one that fits a S 2000, heat it up with a heat gun, quickly install it on the WBA head and press down on the bezel. It has to go down about a 1/2 or so. Just bend it a small amount at a time, put it in the machine and see if the door will close completely. ( I don't use the heat gun on the bezel if it's installed the head because I don't think the head needs all that heat ) And maybe if you don't have a heat gun, your Wife's hair drier may get hot enough, I don't know.
Title: Re: WTB - Bill validator bezel & bill guide Post by: jiggywithit on January 19, 2014, 05:51:36 PM The bezel you are calling yellow, I thought they were green, Anyway I've always had a hard time finding them. most times they used black ones. I've found if you have a green one that fits a S 2000, heat it up with a heat gun, quickly install it on the WBA head and press down on the bezel. It has to go down about a 1/2 or so. Just bend it a small amount at a time, put it in the machine and see if the door will close completely. ( I don't use the heat gun on the bezel if it's installed the head because I don't think the head needs all that heat ) And maybe if you don't have a heat gun, your Wife's hair drier may get hot enough, I don't know. I think you are right. It might be green. I will see if I can pick up a S2K bezel and give this a shot. I do have a heat gun I can use. :) Title: Re: WTB - IGT Bill validator bezel, bill guide, 10 switch GK door harness & more Post by: Buzz on January 19, 2014, 06:29:13 PM I'll send you one that will fit your machine, along with the key chip (tomorrow.)
Title: Re: WTB - IGT Bill validator bezel, bill guide, 10 switch GK door harness & more Post by: jiggywithit on January 19, 2014, 08:18:42 PM I'll send you one that will fit your machine, along with the key chip (tomorrow.) Thank you sir! You did not mention anything about paypal.. so I assume it is like the last thing you sent to me. A $20 donation has been made to NLG in your honor. |