|
Title: JCM Calibration Post by: keystone9 on January 21, 2014, 05:08:01 PM Doe's any one know if the JCM calibration paper will work the same for IGT or Bally? Thanks.
Title: Re: JCM Calibration Post by: rjpohl on January 21, 2014, 05:23:44 PM The calibration paper is for a specific model BV. It will work for Bally, IGT, WMS etc.
Title: Re: JCM Calibration Post by: harp on January 21, 2014, 05:36:05 PM The calibration paper is for a specific model BV. It will work for Bally, IGT, WMS etc. Not sure what you meant to say, the Calibration Paper for the WBA is Black & White, DIP Switches 5,6,7 & 8 On wait for cycle insert paper Black end first, In/Out twice then rejects DIPS back to original position and off you go, does not matter what game it is for Title: Re: JCM Calibration Post by: keystone9 on January 21, 2014, 07:53:43 PM I have a paper, (card), that I have used for IGT and was just wondering if the same card works for Bally, JCM. I tried it and it works. I like to ask someone if I don't know because parts and headaches suck. Thanks. Bill.
|