|
Title: Atronic Cashline Comm problems Post by: BrianRGI on April 24, 2009, 12:50:40 PM I'm running into a problem with communication on the Atronic
Cashlines. The machines are communicating but I keep getting the message 'Communication Level or Structure Version Mismatch' and the machine locks up prohibiting full EFT/Cashless/Bonusing. Have you seen this before? Here is what I am running; Main = P-SPH2-B-A-CG-USA Paytable = Q555---A-01-B-8808 Comm = P_-09-MR-STD_-_-08A SAS = 5.02 Comm board settings; SW7 =1 S5 switch 6 = On SenII harness connect to P2 TITO PCB in P5 System is Aristocrat SENII I don't know if it is the Main software or an option/dip setting causing this. Comm/Main and Config are all cleared. Any help would be appreciated. Thanks, Brian Title: Re: Atronic Cashline Comm problems Post by: TZtech on April 24, 2009, 02:42:17 PM Hi
Is that error on the system or on the machine ? Is it a cashless sytem or TITO ? Regards Ian Title: Re: Atronic Cashline Comm problems Post by: BrianRGI on April 24, 2009, 09:44:28 PM Ian,
Thanks for the response. The message is on the machine. Sorry, it's TITO not cashless. The machine is communicating but the message appears no matter what I've tried. Brian Title: Re: Atronic Cashline Comm problems Post by: TZtech on April 25, 2009, 04:59:38 AM Hi There
Have a look at this so long. Title: Re: Atronic Cashline Comm problems Post by: BrianRGI on April 25, 2009, 10:23:38 AM Ian,
Thanks mate. Brian Title: Re: Atronic Cashline Comm problems Post by: Randy0777 on May 02, 2009, 04:18:38 AM TZtech, :131- :131- :131- I've switched my Atronics over to four different games. Only one I could ever get to work was the "Happy Safari", all the rest would keep giving me a COMM-BOARD ERROR. I have two different COMM boards and both work with Safari. Now I know what the settings are for the board(not in the manual and I've been looking everywhere for it). Been playing with this for a few weeks :37-
Right before I read this post I pulled all the chips(14) back out to put back in Safari...guess I'm putting the same one I just removed to try :89- Title: Re: Atronic Cashline Comm problems Post by: TZtech on May 03, 2009, 04:35:36 PM Hi
From some posts on this forum it seems that on the american software the comms board sw is linked to the board (From the response you got on the other forum not to sure if this is true) Over here we have generic comms sw. Let me know what games you are trying to get operational and i will see if i can dig up any info. Regards Ian |