|
Title: IGT S-Plus WBA11 issues. Post by: montech on January 29, 2014, 05:44:34 PM Ok here we go
I have a hot peppers with a WBA11 transport and WBA13 head. The Eprom is a WBA-11SS ID 022/023 VER 3.00 right from JCM The machine is set to 5 1 Player initiated credit with the Bill payout set to standard mode 8 0. I can get the insert bills light to light when I test input 27 0 and it flashes 101010 I get the bill to go in and out when I test output 26 When I go back to game mode the BV cycles, but never does the insert bills light come on and of course wont even take a bill in. This machine was working fine in the customers house...saw it myself. When I turned it on in the shop this issue came up(its a trade in) I have cleared and BV/Set Denom chipped it (9-1) Any ideas? Title: Re: IGT S-Plus WBA11 issues. Post by: rjpohl on January 29, 2014, 05:51:51 PM Are you sure it's setting up completely? They're a certain sound (da da) that it makes at the very end of the cycle. If you're in a cold building you might need to warm BV with a hair dryer.
Bob Title: Re: IGT S-Plus WBA11 issues. Post by: montech on January 29, 2014, 06:08:28 PM Hi Bob
Yes I set it up completely. I just cleared and BV/Denom set for the third time. Its working. :279- So could have been the cold, its cool in here. Thanks. Could have been I was holding my tongue to the left. Or maybe sunspots :97- Title: Re: IGT S-Plus WBA11 issues. Post by: montech on January 29, 2014, 06:39:57 PM Thanks again for the input Bob.
Can you or anyone else tell me what might be the difference between version 3.00 and version 3.60? I have a 3.60 but im hesitant to upgrade this finickey machine. :96- |