|
Title: IGT Hopper Overpay Post by: montech on January 29, 2014, 06:55:58 PM Hello All
What causes this hopper to pay out one coin over(3100) on anything over 10 coins? Title: Re: IGT Hopper Overpay Post by: Jim on January 29, 2014, 07:41:07 PM the motor brake assembly is dirty, when the motor stops the red pawl should stop the rotor from turning, when it gets dirty it will let the inertia of the wheel to continue and let one or two coins out before it stops and that will generate the code.
disassemble the pivot lever and the red pawl on the motor and clean everything, you will see dirt built up on all the moveable parts. the lever should push in and spring back to the top position immediately. you will notice if it is sticking. Jiml Title: Re: IGT Hopper Overpay Post by: montech on January 29, 2014, 07:50:20 PM Great info
Thanks so much Jim. |