New Life Games Tech Forums

ok so i have 5 different s+ slot machines and ive noticed that the buttons on each one light up in different ways. for example on 2 machines the credit/cash out buttons flash and on the others they just stay lit. on some of them the insert coin light flashs on others it just stays lit. i have one where the bill acceptor light just stays on where the others flash. and lastly on one of the machines the bet one and bet max buttons dont light up when there is credits in the machine. ive tried working bulbs and still nothing. im curious is there something in the settings that changes these lighting features or is it set by the game chip? let me know, id be interested in setting them so that they are all the same if possible. thanks

The SP chip and how the machine is programmed determines many of the things you described.  However:

- The bill acceptor bezel should never flash.  It should remain lit (steady) when the machine is ready to accept a bill, and turn off when the machine is not ready to accept a bill.  As such, if you're playing a machine constantly, it may appear to slowly "flash" on and off as the bill acceptor is disabled while the reels are spinning, and then is re-enabled after the game is completed.

- The "Insert Coin" lamp may flash with certain SP chips to indicate that a door had been opened and then recently closed.  That flashing should stop after one paid game has been completed.  (This is similar to the lower candle flashing rapidly after a door has been closed, until the next paid game is completed.  It simply varies by SP chip.)

- As far as your machine where the Bet One and Max Bet buttons aren't lighting up when there are credits, I would suspect bad bulbs or wiring or poor wiring connections.  I can't imagine that the SP chip would cause those to not light up when you'd expect them to, but the ultimate test would be to try a different set of chips (or swap boards with one from a machine that behaves as you expect it to) to see if there's any difference.

ok, now that youve explained it it looks like your right. the bill acceptors that flash are ones that arent currently working and the insert coin only flashes after the doors been opend like you said. my only isuue now is the bet one and bet max buttones not lighting up on the one machine. ive tried different buttons and bulbs and still cant get it to work. im going to check for voltage at the bulb next and then i guess i should try a board swap. could it be a faulty chip on the board or something?