|
Title: JCM-45-PB2 - Western Money Post by: FOXSSLOTS1 on April 26, 2009, 11:56:06 AM I had originally posted this question in the Craigslist catagory as I was looking at an older S+ after picking up this machine it had the JCM BV mounted to the right of the reels - got 2 complete BV units with the machine - both are JCM-45-PBS mounted in a Western Money transport - did the SET 15 - etc. BV "cycles" but will not light up and accept coins - Lights inside the bv seem to be on. Both units have the same result - otherwise machine works - i.e. accepts coins - plays..... Is this bv worth fixing? I have a replacement door I could use to eliminate the BV - would have to run a harness to the DISPLAY - would not attempt trying to add a 200 to this machine. Title: Re: JCM-45-PB2 - Western Money Post by: cp on April 26, 2009, 02:41:24 PM I had a few "Western Money" slots yrs ago. I just converted them to "coin only" ....pull the BV out. get a reel glass for coin only. and (maybe) replace the reel shelf...since the reels may not line up in "coin only" reel glass. OR for a less cost, just pull BV, get a coin only display (I have them), get a "sticker" to place in front of display, get a small rectagular glass or plexi and place that where the West.Money used to be.
Title: Re: JCM-45-PB2 - Western Money Post by: Jim on April 27, 2009, 11:46:29 PM Barry Here is a easy way to do this, pull the assembly out, cover the hole, wire harness should be there tucked behind the coin acceptor, add the display.
You can replace the glass and make it look professional. You do not have to replace the door!! Jim Title: Re: JCM-45-PB2 - Western Money Post by: Jim on April 27, 2009, 11:47:51 PM second set
Title: Re: JCM-45-PB2 - Western Money Post by: Jim on April 27, 2009, 11:48:37 PM Last
Title: Re: JCM-45-PB2 - Western Money Post by: blueridgeslots on April 28, 2009, 12:23:00 AM Jim, that is a Videotronics you pictured, Barry has a Western Money System that comes out the front not the side extract
Title: Re: JCM-45-PB2 - Western Money Post by: FOXSSLOTS1 on April 28, 2009, 07:14:34 AM thanks guys - I keep getting the same answer - take it out - how about leaving it in as is OR - can this unit be fixed?
|