|
Title: 3.6 v Lithium with tabs to solder on board Post by: Sprky on February 12, 2014, 03:03:50 PM Looking for a replacement and new 3.6 volt lithium battery SAFT that has the tabs already on the battery to be soldered on CPU board
Title: Re: 3.6 v Lithium with tabs to solder on board Post by: number1duckfan on February 12, 2014, 03:34:27 PM I would just go to radio shack and get a battery holder $2 and they sell the 3.6 volt battery also $9
John Title: Re: 3.6 v Lithium with tabs to solder on board Post by: Sprky on February 12, 2014, 03:39:18 PM Went there and they don't carry the holders anymore. Actually found the battery at battery II batteries for $9.00 with the tabs! $12 to ship. I really appreciate your help! Hope this works or I may bending your ear a little more. Thanks Bill
Title: Re: 3.6 v Lithium with tabs to solder on board Post by: number1duckfan on February 12, 2014, 04:02:32 PM Well the Radio Shack down the street has them, I could pick it up for you and drop it in the mail, I don't see it costing more then a couple of dollars to ship, Where are you from?
John Title: Re: 3.6 v Lithium with tabs to solder on board Post by: Sprky on February 12, 2014, 04:20:50 PM Actually found the battery at battery II batteries for $9.00 with the tabs! $12 to ship. Thanks
Title: Re: 3.6 v Lithium with tabs to solder on board Post by: number1duckfan on February 12, 2014, 04:34:49 PM N/P
and welcome to Newlifegames :88- Title: Re: 3.6 v Lithium with tabs to solder on board Post by: qbert on February 12, 2014, 05:45:08 PM I pull holders from old computer mother boards I always seem to have one or two around.
Rich Title: Re: 3.6 v Lithium with tabs to solder on board Post by: Sprky on February 13, 2014, 11:57:51 PM Would you know how to bypass the 'Eyes" on the door?
Title: Re: 3.6 v Lithium with tabs to solder on board Post by: ramegoom on February 14, 2014, 12:45:41 AM I use this style:
http://www.mouser.com/ProductDetail/Tadiran-Batteries/TL-2100-PBP/?qs=sGAEpiMZZMv6Ao2LO1QMWpAEsyNNNMQQ (http://www.mouser.com/ProductDetail/Tadiran-Batteries/TL-2100-PBP/?qs=sGAEpiMZZMv6Ao2LO1QMWpAEsyNNNMQQ) Title: Re: 3.6 v Lithium with tabs to solder on board Post by: paul on February 14, 2014, 01:59:27 AM I think razs410 has 3 at that cost I think
Title: Re: 3.6 v Lithium with tabs to solder on board Post by: CVslots on February 14, 2014, 02:04:41 AM Would you know how to bypass the 'Eyes" on the door? Check out the S2000 forum, at the very top of the board, Door Optic Bypass thread is a sticky I believe. Title: Re: 3.6 v Lithium with tabs to solder on board Post by: Sprky on February 14, 2014, 11:33:12 AM Sorry not very good at navigating site. Is there a "search" area that I can find out how to bypass door optics on an older $1 Double Diamond machine?? Thanks
|