|
Title: Wts S2000 Boards Post by: The Game King on February 14, 2014, 12:16:42 PM Over 25 S2000 enhanced boards. Selling them $25 a piece. These are untested. If you want multiple just ask me what price. PM me.
Also have S2000 coin trays $10 Each s2000 reels $10 set Power supplies $30 WBA 12/13 $35 Reel Glass Digital display $10 each 3902 Boards wba 12/13 $35 Some glass kits Just ask etc Thanks Title: Re: Wts S2000 Boards Post by: mvco on February 14, 2014, 11:56:52 PM If those reel sets are backlit I know I couold use a couple sets.
Title: Re: Wts S2000 Boards Post by: rocky mountain slots on February 15, 2014, 11:05:34 AM are thoses s2000 enchanted boards are they made in mexico thats the bad batch if they are igt got from mexico
Title: Re: Wts S2000 Boards Post by: therockinelvis on February 15, 2014, 11:52:30 AM PM sent for 2 sets of reels
Title: Re: Wts S2000 Boards Post by: Jimise on February 15, 2014, 11:21:54 PM Is it all 3 reel parts, or do you have any 5 reel parts?
Glass, reels etc..... Thanks! Title: Re: Wts S2000 Boards Post by: p100 on February 17, 2014, 01:59:51 AM I have an IGT Triple Stars 5 line that has no bill accept or coin hopper. Do you have a accepter that would be compatible with it? Excuse my lack of knowledge if I haven't included info info to answer the question... First slot I've owned.
Title: Re: Wts S2000 Boards Post by: cowboygames on February 17, 2014, 02:20:04 AM The WBA validators he has should be fine, but a picture of the inside of your machine to make sure you have the housing to hold it would sure help
Title: Re: Wts S2000 Boards Post by: p100 on February 17, 2014, 02:27:36 AM Thank you for the advice. I do have the housing but will take a picture tomorrow to make sure. I removed a metal box that has a door on it with a large spring inside. I assume this is the housing but I make no statements as to the level of my slot machine knowledge.... :131-
....The box in question pulled right out by moving a small catch lever Thanks again for the help. :244- Title: Re: Wts S2000 Boards Post by: cowboygames on February 17, 2014, 02:40:39 AM Sounds like you have what you need, but a picture to be sure is always good. You will need a key chip to program the machine so it recognizes the BV. We'll need to know what board your machine uses to recommend the right key chip. Turn the machine off, open the door and pull the tray out on the lower left side of the cabinet then take a picture and post it also.
Title: Re: Wts S2000 Boards Post by: Foster on February 17, 2014, 03:25:51 AM Key chip not required to enable BV in a S2000
Title: Re: Wts S2000 Boards Post by: cowboygames on February 17, 2014, 03:41:29 AM I need to turn a machine on. I was thinking that's in the key chip menu. Thanks for the correction Foster
Title: Re: Wts S2000 Boards Post by: The Game King on February 17, 2014, 11:09:36 AM Thanks Cowboy and Foster for getting to that question. Yes They will work, we also have them with the housing and a cash can if needed.
|