|
Title: WTB - Aristocrat minor finishing pieces Post by: dcpyatt on February 18, 2014, 03:14:28 AM I purchased a couple of Aristocrat MAV500 cabinets to re-purpose and am looking for some minor pieces to make the external appearance more complete.
Here are the items that I may be interested in purchasing if you have them available: Speaker grilles. I need 2 sets, right now I have 2 but the mesh pattern is different between them Bill acceptor filler plate. Need 2, I am not going to be using bill acceptors in these units. Coin entry plate. US Penny/Nickel/Dime/Quarter, Not sure the final denomination. Coin tray. I have one, need two. Coin Hopper. Need two Meter clear plastic lens. I have one, need two. Also would like to get a set of side keys for the switches. Make that one of the barrel keys, the other is the same as the jackpot keys for the Bally and IGT. I know that there are some of these items available on Rudy's right now, just wanted to see if any members might have spares they would be interested in parting with and helping out a fellow member piece together a cosmetically complete shell. Thanks! DaveP in Ohio Title: Re: WTB - Aristocrat minor finishing pieces Post by: dcpyatt on February 19, 2014, 10:31:14 AM Bit the bullet and bought the parts that Rudy's had that I needed. So here is the list as it stands of what I need to obtain yet:
Speaker grilles. I need 2 sets, right now I have 2 but the mesh pattern is different between them Bill acceptor filler plate. Need 2, I am not going to be using bill acceptors in these units. Coin entry plate. US Penny/Nickel/Dime/Quarter, Not sure the final denomination. Meter clear plastic lens. I have one, need two. Barrel key for side switch. Thanks! Hopefully my buying now won't hamper my getting pinball parts next weekend... I need an obscure backglass that may run big bucks if it even is at the Pinball Expo... and legs... who loses legs to a pinball machine?!? DaveP in Ohio |