|
Title: How do You clear a Code 24 Coin Reverse??? 5500 Post by: AcePeter on April 27, 2009, 08:45:28 PM Please how do you do this...I've tried a simple ram clear and still it will not clear. Is there anything else I can try???
Title: Re: How do You clear a Code 24 Coin Reverse??? 5500 Post by: StatFreak on April 27, 2009, 10:32:31 PM If the machine has no other issues then that tilt should clear by just opening and closing the main door. Have you checked the connections & wiring to the optics? The optic board itself may also have an issue. Have you cleaned the coin-in optics? Use a QTip dampened with water and dry with another QTip. Those are the places that I'd start. Can you swap the optic board with a known good one to test?
Title: Re: How do You clear a Code 24 Coin Reverse??? 5500 Post by: AcePeter on April 27, 2009, 11:19:48 PM It's a 5¢ machine ( I think the 5¢ optic is BAD ) I just now used a 25¢ optic that I know works and it cleared the 24 and worked until I got a 20 Error code. You think it's maybe because I was feeding it nickles it made that 20 ( COIN JAM) code? :103-
Title: Re: How do You clear a Code 24 Coin Reverse??? 5500 Post by: StatFreak on April 27, 2009, 11:55:24 PM You might have to install a shim to ensure that all of the coins occlude the optics since the nickels are slightly smaller than the quarters.
Title: Re: How do You clear a Code 24 Coin Reverse??? 5500 Post by: AcePeter on April 28, 2009, 11:41:04 AM Thanks I solved it now to get my DBV-200 to stop stealing money.....Cash not giving me credits...... then it blinks??Thanks all for the HELP
Title: Re: How do You clear a Code 24 Coin Reverse??? 5500 Post by: stayouttadabunker on April 28, 2009, 12:08:55 PM Good job Ace! :3- Glad you got it working...
|