|
Title: need help with a blown resistor on a cc16 Post by: Flyinryan26 on February 27, 2014, 12:59:27 AM any help or if you can supply me one the same as this would be greatly appreciated..
have blown a resistor and doesnt give a value on it and the color tape has blown off... also need a loom from the 12pin molex to the cc16 cable and to the optics in the door etc... Title: Re: need help with a blown resistor on a cc16 Post by: tkrozleski on February 27, 2014, 11:41:41 AM Is it a 24 volt AC or DC? Is it for Bally or IGT?
What position is the resistor labeled/designated on the board label? R17 ? If so R17= 75 ohm At the top of the home page is a "NLG File System Download" tab, in there is schematics for all the comparitors Title: Re: need help with a blown resistor on a cc16 Post by: Flyinryan26 on February 27, 2014, 01:28:22 PM Its a cc16 24v m8.. not sure if thats the only problem I'm having coz the loom attached to it has a lot of cuts and joins in it... thanks so much for ur help been stuck on this machine for nearly a year... :-( n im not that great with electronics so wat does r17 mean dummys version.... thanks m8
Title: Re: need help with a blown resistor on a cc16 Post by: stayouttadabunker on February 27, 2014, 03:52:05 PM That resistor is a 100k at 5%
The color bands are gold, brown, black, brown where the gold band means 5%. Title: Re: need help with a blown resistor on a cc16 Post by: Foster on February 27, 2014, 04:32:14 PM The correct way to state resistor colors is first digit, second digit, multiplier, tolerance.
a 100K ohm 5% would be brown black yellow gold a 100 ohm 5% would be brown black brown gold Title: Re: need help with a blown resistor on a cc16 Post by: stayouttadabunker on February 27, 2014, 04:50:33 PM The correct way to state resistor colors is first digit, second digit, multiplier, tolerance. a 100K ohm 5% would be brown black yellow gold a 100 ohm 5% would be brown black brown gold Thanks Foster! :3- This particular resistor is brown/black/brown/gold then. That makes it a 100 Ohm resistor at 5%? Title: Re: need help with a blown resistor on a cc16 Post by: Foster on February 27, 2014, 05:14:54 PM Then is it is 100ohm 5%
Title: Re: need help with a blown resistor on a cc16 Post by: CommTech on February 27, 2014, 10:32:15 PM any help or if you can supply me one the same as this would be greatly appreciated.. have blown a resistor and doesnt give a value on it and the color tape has blown off... also need a loom from the 12pin molex to the cc16 cable and to the optics in the door etc... The bad resistor is an effect, not a cause of a problem. If you replace just the resistor, the new one will also burn up unless you find and correct what is shorted first. :98- |