New Life Games Tech Forums

General NLG Chat => The Slot Shop **Tech Talk** => Topic started by: Diehard on May 03, 2009, 07:14:22 AM



Title: help to get my slot going
Post by: Diehard on May 03, 2009, 07:14:22 AM
I just purchased a aristocrat esprit slot and when you turn it on it lights up but it makes this buzzing sound and dose nothing else
if anyone can help you'll be a god among men.
s/n x2889


Title: Re: help to get my slot going
Post by: Op-Bell on May 03, 2009, 07:01:47 PM
Ah, another Esprit. We've had a few discussions about those. Use the "search" button at the top and look for "Esprit" to find them.
 


Title: Re: help to get my slot going
Post by: Ozzy on May 03, 2009, 07:18:45 PM
A  good start to your problem might be to check your power supply, check all fuses;

F2 - 7A
F3 - 1.5A
F4 - 1A
F5 - 1.5A
and F6 - 7A

The power supply is situated in the front right hand side behind the flap that lifts up above the reel mech, there is a thumb screw under it that holds the psu in place.



cheers


O Z Z Y


Title: Re: help to get my slot going
Post by: Ozzy on May 03, 2009, 07:33:34 PM
 :129- is the "buzzing" sound coming through the speaker or is it from the handle release solenoid  :103-


cheers


O Z Z Y


Title: Re: help to get my slot going
Post by: Diehard on May 04, 2009, 06:26:36 AM
is the "buzzing" sound coming through the speaker or is it from the handle release solenoid
cheers
O Z Z Y
Thanks for the reply guys, there is a clicking sound From the speaker and a noise from what i think is the turn motor ( black box with a cog behind the coin barrel )


Title: Re: help to get my slot going
Post by: Diehard on May 04, 2009, 07:02:17 AM
Ah, another Esprit. We've had a few discussions about those. Use the "search" button at the top and look for "Esprit" to find them.
 
Thankyou for the help and i found the circuit diagrams that you posted so i hope they help


Title: Re: help to get my slot going
Post by: Diehard on May 06, 2009, 11:14:50 AM
can any one help me with a complet wiring diagram for an esprit slot, any help would be great


Title: Re: help to get my slot going
Post by: Ozzy on May 06, 2009, 11:31:25 AM
 :172-


cheers


O Z Z Y