|
Title: HELP with a bally blazing 7 5500 (1997) Post by: ITALIANO on May 04, 2009, 06:46:50 PM NEED HELP PLEASE
I just aquire 1997 blazing 7,when i plug in was give me 81 code so i change the battery,got 83F so i install the safe clear eprom,and follow the procedure,install back the board,switch machine on and press the test and the pseudo coin button,but dont give me any message on the win paid.WHAT I DO WRONG. bATTERY GOOD,CLEAR EPROM NEW.hELP PLEASE :99- :103- Title: Re: HELP with a bally blazing 7 5500 (1997) Post by: jdkmunch on May 04, 2009, 07:42:38 PM Is the top candle blinking when you get the 83f error? If so how fast -
Title: Re: HELP with a bally blazing 7 5500 (1997) Post by: jdkmunch on May 04, 2009, 07:48:52 PM also when you did the ram clear did all the lights flash and CL C show up - the C is for a complete ram clear. Maybe you didn't hold down pseudo and test long enough and got a CL P which is a partial ram clear.
Title: Re: HELP with a bally blazing 7 5500 (1997) Post by: Slottex on May 04, 2009, 08:18:46 PM Sounds to me your procedure is wrong. Install ram clear clear chips , install board, hold down test and pusedo and turn on the power wait for the CL C on the display for a complete ram clear.Power down reinstall you chips and all should be fine.
Title: Re: HELP with a bally blazing 7 5500 (1997) Post by: ITALIANO on May 04, 2009, 09:49:21 PM HI GUYS FOR HOW LONG I NEED TO PRESS THE TEST AND PSEUDO COIN BUTTONS???
BEFORE THE CL C COME ON.tHANKS :118- Title: Re: HELP with a bally blazing 7 5500 (1997) Post by: Neonkiss on May 04, 2009, 10:00:37 PM Press and hold BOTH buttons before turning on the power switch.
I've never seen it go past 30 seconds. Longer than that and you have another problem. What mains are you using? 92000? If so, you should not need to use the clear chip. You should be able to use the jumper instead. Title: Re: HELP with a bally blazing 7 5500 (1997) Post by: StatFreak on May 04, 2009, 10:20:31 PM HI GUYS FOR HOW LONG I NEED TO PRESS THE TEST AND PSEUDO COIN BUTTONS??? BEFORE THE CL C COME ON.tHANKS :118- Press and hold BOTH buttons before turning on the power switch. ... Actually, do as Neonkiss says, but you should see CH-C in the window when you turn on the machine. After you see CH-C, then RELEASE the buttons. The CH-C should change to CL-C. Then turn off the machine and remove the clear chips. Title: Re: HELP with a bally blazing 7 5500 (1997) Post by: ITALIANO on May 05, 2009, 01:30:06 AM HI GUYS I TRIED AGAIN,NO FLASHING LIGHTS,ONLY THE RESET BUTTON IS FLASHING.IT IS POSSIBLE THE SAFE CLEAR EPROM ARE NOT GOOD???
AND I UNDERSTAND AFTER 1994 THEY NEED THE CLEAR EPROM.NOT THE JUMPER :37- :99-IF I TRY TOTHE JUMPER ICAN DAMAGE THE BOARD???? Title: Re: HELP with a bally blazing 7 5500 (1997) Post by: ITALIANO on May 05, 2009, 02:17:46 AM THANK YOU ALL I FIX WITH THE JUMPER. :131- :3-
Title: Re: HELP with a bally blazing 7 5500 (1997) Post by: StatFreak on May 05, 2009, 02:21:34 AM THANK YOU ALL I FIX WITH THE JUMPER. :131- :3- Glad to hear you got it working! :3- :3- Title: Re: HELP with a bally blazing 7 5500 (1997) Post by: ITALIANO on May 05, 2009, 10:01:25 AM THE SLOT WORKING GREAT, NO BAD I PAID ONLY $25.00.HERE SOME PICS.
Title: Re: HELP with a bally blazing 7 5500 (1997) Post by: dpalmi on May 05, 2009, 11:28:38 AM THE SLOT WORKING GREAT, NO BAD I PAID ONLY $25.00.HERE SOME PICS. Wow! That's a great deal for $25...and it has the progressive in the top too :) Dan #2 Title: Re: HELP with a bally blazing 7 5500 (1997) Post by: jdkmunch on May 05, 2009, 03:13:02 PM Glad to hear you got it going. Looks good especially for $25.
|