New Life Games Tech Forums

**Reel Slots** Gaming Machines => WMS Reel Games. => Topic started by: jdkmunch on May 06, 2009, 11:21:08 PM



Title: Missing DOT Eproms (I think)
Post by: jdkmunch on May 06, 2009, 11:21:08 PM
I got an X factor kit from eBay and it came with

XU31 2600
XU30 C400
XU18 5F00
XU17 C000
XU3 7BDE
XU2 5953

I think from reading stat's post I'm missing the dot chips right?



Title: Re: Missing DOT Eproms (I think)
Post by: StatFreak on May 07, 2009, 03:58:46 AM
Right.  :58-

Dot XU3  (Don't even ask why they labeled this with the same number as the chip on the lower board. Someone at Wms was definitely dead from the neck up!)
Dot XU4


Title: Re: Missing DOT Eproms (I think)
Post by: cfh on May 07, 2009, 08:44:44 AM
And dot XU10 (the dot controller firmware, can be used from another game).
i always run version 5.12, 5.13 or 5.14. earlier versions before 5.12 not so good.


Title: Re: Missing DOT Eproms (I think)
Post by: jdkmunch on May 07, 2009, 09:26:40 AM
I have 5.13-  unless there is some compelling reason to switch (Elvis pig) then that is what it shall stay!


Title: Re: Missing DOT Eproms (I think)
Post by: StatFreak on May 07, 2009, 03:25:54 PM
I have 5.13-  unless there is some compelling reason to switch (Elvis pig) then that is what it shall stay!

Good question. What are the differences between Dot versions 5.12, 5.13, and 5.14?


Title: Re: Missing DOT Eproms (I think)
Post by: knagl on May 07, 2009, 08:54:14 PM
I'd guess just driver improvements -- "service packs" if you will.  That chip isn't the one that will affect Elvis pig showing up or not.