|
Title: DBV-145 runs constantly... Post by: MrBellMan on May 10, 2009, 02:55:02 AM My IGT slant top has a DBV-145. When the power is turned on, the BV goes through a start up sequence but then it just runs like there's money in it. I have removed the unit, checked everything I can think of, but I can't seem to get it to stop.
Any ideas? I have also changed out my cash can, but that didn't help. I see some threads on BVD-145, but nothing that mentions something like this. Thanks, Rob Title: Re: DBV-145 runs constantly... Post by: MrBellMan on May 10, 2009, 02:13:25 PM Is there a FAQ for bill validators?
Rob Title: Re: DBV-145 runs constantly... Post by: Buzz on May 10, 2009, 04:05:49 PM Rob There are some great Pics on the site of what is most likely your problem alas I could not find them. Now when reinstalling your transport note two small ears on lower back of transport these ears must go into the slots in the chassis. Buzz
Title: Re: DBV-145 runs constantly... Post by: OhioGaming on May 10, 2009, 11:02:05 PM One thing you can check is to make sure the four pins on the right side of the head are straight in line. Sometimes when one is bent over and not making a connection will cause this type of problem.
Title: Re: DBV-145 runs constantly... Post by: paul on May 11, 2009, 12:01:45 AM make sure your validator is lined up good with transport also try another transport :103-
Title: Re: DBV-145 runs constantly... Post by: MrBellMan on May 11, 2009, 12:51:08 AM This is exactly why I was looking for a FAQ. I'm not sure what some terms (transport, pins, etc...) are since I have not dabbled with BV before. Here are some pictures of my BV and the slot on the game itself that it slides into.
BTW: What is the red handle lever for? Rob Title: Re: DBV-145 runs constantly... Post by: MrBellMan on May 11, 2009, 12:51:41 AM And two more...
Title: Re: DBV-145 runs constantly... Post by: dpalmi on May 11, 2009, 12:53:47 AM Rob There are some great Pics on the site of what is most likely your problem alas I could not find them. Now when reinstalling your transport note two small ears on lower back of transport these ears must go into the slots in the chassis. Buzz Hello! I think you are talking about my post...I've put a link below...check it out. Now this was for an IGT machine, so I'm not sure if it will apply.... http://newlifegames.net/nlg/index.php?topic=731.msg8620#msg8620 (http://newlifegames.net/nlg/index.php?topic=731.msg8620#msg8620) Dan Title: Re: DBV-145 runs constantly... Post by: Buzz on May 11, 2009, 01:08:41 AM Dan Slant top and upright take the same BV & transport (IGT) This must be 3 times you have had to dig your old post out Thanks I could not find it Buzz
Title: Re: DBV-145 runs constantly... Post by: dpalmi on May 11, 2009, 01:26:27 AM Dan Slant top and upright take the same BV & transport (IGT) This must be 3 times you have had to dig your old post out Thanks I could not find it Buzz I'm the one who originally posted it and it took me 10 minutes to find it....lol :) Dan #2 Title: Re: DBV-145 runs constantly... Post by: Buzz on May 11, 2009, 01:39:23 AM Rob Pins are electrical connections (pins inside a plug) Transport is the part that Dan circled the ears in red. ( he calls them pins) BV head is the square Black part that is attached to transport . Red lever lowers the gear to cash can Lever MUST be up when every thing is installed properly. You follow Dans instruction in his post, every thing explained better than I can. Buzz
|