|
Title: WBA 20 Question Post by: Forrhouse on May 15, 2009, 08:01:28 PM I was just looking at one of my machines and I happened to pull out the head and transport.
The transport is a wba20-SS. The head has the front sticker scratched off. :37- The whole thing works great and accepts my American $1's etc, but how can I figure out if the head is a WBA-20 or a WBA -10 or WBA-11 head without the front sticker. I'm not familiar with the WBA 20-23 series heads and transports. What would the WBA 20-SS be equivalent to. the WBA-10 or WBA-11? Thanks, Eric Title: Re: WBA 20 Question Post by: blueridgeslots on May 15, 2009, 08:22:33 PM 10 or 20 1 Meg Flash (board has 3 white connectors on side)
11 or 21 1 Meg Eprom same connectors as above 10, 11, 12, 13 Head will have 3 Magnetic Sensors in top of Head (Head is same for all) 20, 21, 22, 23 Head will have 1 Mag Sensor (on Top) and 2 larger wider windows (on bottom plate of head) Same head for all Title: Re: WBA 20 Question Post by: a69mopar on May 15, 2009, 09:11:25 PM Hi Eric,
Hope this helps. Title: Re: WBA 20 Question Post by: blueridgeslots on May 15, 2009, 09:28:17 PM OK, 3 wider windows, I know my memory is shot
Title: Re: WBA 20 Question Post by: rickhunter on May 16, 2009, 12:45:16 AM I would think a good indicator would be if it takes American currency, then by definition it's got a magnetic head, thus a 10,11,12,13 head. Am I right to assume this, or would non-magnetic heads also take US$.
Title: Re: WBA 20 Question Post by: a69mopar on May 16, 2009, 12:48:38 AM You are correct, a wba 2x head wouldn't accept U.S. bills.
|