New Life Games Tech Forums

General NLG Chat => The Slot Shop **Tech Talk** => Topic started by: BeanMan on May 15, 2009, 11:58:19 PM



Title: HELP! again...now I have error 42...IGT S+ Triple Diamonds
Post by: BeanMan on May 15, 2009, 11:58:19 PM
I have a new problem with my machine!

ERROR 42 and the reels keep spinning slowly in a staggering style...

I am hoping that you guys out there who were soooo helpful before are willing to get me back up and running again!!

Thanks in Advance!

PS>  I hit 1,800 quarters on yesterday and I am chomping at the bit for a second machine already!! is that normal?? :103-


Title: Re: HELP! again...now I have error 42...IGT S+ Triple Diamonds
Post by: stayouttadabunker on May 16, 2009, 12:10:58 AM
open door, turn reset key, close door...good to go...
error 42 means the middle reel has a problem...dig around


Title: Re: HELP! again...now I have error 42...IGT S+ Triple Diamonds
Post by: BeanMan on May 16, 2009, 12:22:50 AM
Thanks...

 :72- :72- :72- :72-

Now its says erro 41....

I tired the same thing but now help.... :99-


Title: Re: HELP! again...now I have error 42...IGT S+ Triple Diamonds
Post by: stayouttadabunker on May 16, 2009, 12:29:25 AM
uh oh...bad news...
You better start shopping around for a new MPU board...
The reel resistors are going...pack of five resistors down on the bottom right of the board.
It's either that or something more serious...
I think Forrhouse bought the MPU test machine that may be able to diagnose the boards' problems.
Try to PM him with your board problem...maybe you can send it out to him for a repair?
Time for a good spare MPU board....
Anyone else see anything I don't?  This one's a job for Cactus Jack???


Title: Re: HELP! again...now I have error 42...IGT S+ Triple Diamonds
Post by: rickhunter on May 16, 2009, 12:41:32 AM
Or the reel driver.  MPU boards are cheap enough nowadays.  I'd say get a couple while the getting is good.  These will dry up eventually.


Title: Re: HELP! again...now I have error 42...IGT S+ Triple Diamonds
Post by: brichter on May 16, 2009, 12:48:15 AM
You'd better verify that cash door switch and the adjustment of the main door optics. Multiple reel codes are usually the result of the MPU seeing a door open while the reels are spinning (don't ask me how I know... :25-).

In short, bypass the cash door switch and verify the alignment of the door optics. Your previous posts state you checked the door optic emitter was flashing, but that's only half of the check. The optics have to be aligned correctly, also.


Title: Re: HELP! again...now I have error 42...IGT S+ Triple Diamonds
Post by: MrBellMan on May 16, 2009, 12:51:28 AM
Did it work before? I had a similar issue and it turned out that when I did a game change, my game chip was not fast enough for my 16M board. I put in a faster chip and my 4x errors went away.

Rob


Title: Re: HELP! again...now I have error 42...IGT S+ Triple Diamonds
Post by: BeanMan on May 16, 2009, 01:00:57 AM
ahhh  bypass the cash door switch?!?! 

I'm not really sure what to do...  I guess I will start looking for MPU boards?


Title: Re: HELP! again...now I have error 42...IGT S+ Triple Diamonds
Post by: brichter on May 16, 2009, 01:46:08 AM
ahhh  bypass the cash door switch?!?! 

I'm not really sure what to do...  I guess I will start looking for MPU boards?

Yes, bypass the cash door switch. If you really feel you need to keep it functioning, then tape it down temporarily, then align the door optics.


Title: Re: HELP! again...now I have error 42...IGT S+ Triple Diamonds
Post by: ashyron on May 16, 2009, 02:49:14 AM
Triple Diamond.... :3- You know what this game is really saying don't you...... :103-  It's saying it wants to move in with me :96- so I think you should just pack it up and send it to me. :72- :72-


Title: Re: HELP! again...now I have error 42...IGT S+ Triple Diamonds
Post by: BeanMan on May 16, 2009, 01:04:33 PM
You'd better verify that cash door switch and the adjustment of the main door optics. Multiple reel codes are usually the result of the MPU seeing a door open while the reels are spinning (don't ask me how I know... :25-).

In short, bypass the cash door switch and verify the alignment of the door optics. Your previous posts state you checked the door optic emitter was flashing, but that's only half of the check. The optics have to be aligned correctly, also.

YOU'RE THE MAN!!

I found that the cash can switch was broken and fix it with a piece of pink ribbon from my daughter hair!!

THANKS!!! :131-


Title: Re: HELP! again...now I have error 42...IGT S+ Triple Diamonds
Post by: brichter on May 16, 2009, 03:46:23 PM
Glad to help.  :71- :71-


I've NEVER been burned by a defective cash can switch! :72- :72- :72- :72-




















(At least not this month! :5-)