|
Title: Cashline touchscreen controller Post by: Randy0777 on May 17, 2009, 10:03:06 PM My touchscreen is not working :37- . I checked the voltage coming off the backboard and its ZERO . Anyone know what the voltage should be :103-
I checked the manual,but no luck. Thanks Title: Re: Cashline touchscreen controller Post by: SAT (aka GANDHI) on May 18, 2009, 01:01:25 AM have you checked the fuses? voltage not appearing can be checked also by the leds on the mainboard.
Take a look at the fuses, maybe you have one burned Title: Re: Cashline touchscreen controller Post by: Randy0777 on May 18, 2009, 01:10:22 AM Thanks for the reply... I checked the fuses,all were good. I checked the voltage coming off which was 0
Title: Re: Cashline touchscreen controller Post by: TZtech on May 22, 2009, 04:25:27 AM Hi
Stats Right - All voltages are indicated on the main board Yellow 1 +12V Yellow 2 -12V Red 5 V Green 24 V Touchscreen has 5 volts coming off the backplane board at J12 Regards Ian Title: Re: Cashline touchscreen controller Post by: Randy0777 on May 22, 2009, 05:36:45 PM I checked all the fuses again...still not getting power to the touchscreen controller. I wanted to make sure of the voltage first,so I ran a 5V power pack to the controller and when I go under the test screen it says its not connected :37- Just another item to add to the list :25-
|