|
Title: Progressive system question... Post by: MrBellMan on May 18, 2009, 12:52:32 AM Hi all,
Does anyone know what kind of progressive system I have (see picture)? :103- As far as I can tell it is not marked. It appears to be a multi display system of some sorts. I would like to get some info on it to see if I can install it on my S+ slant top. Thanks, Rob Title: Re: Progressive system question... Post by: brichter on May 18, 2009, 01:21:41 AM That's the IGT progressive that plugs into the 15 pin connector that's already in your top box. It's called a mini Photon. It goes behind the top glass where the top award or "Progressive" sticker is. There were some good install threads on the old site, it doesn't look like they made it over to the new site, though.
But you need to be aware that the wiring is different in the 15 pin connector between the slant top and the upright slot machines. You need to make sure the wiring in the 15 pin on your cable is correct for the slant top before you plug it in! Title: Re: Progressive system question... Post by: MrBellMan on May 18, 2009, 01:32:34 AM Well, I'm told it came from an upright S+. So, I plugged it into my upright. It looks like one display has issues, but it looks like it works (see pic).
Anyone know what to do from here to get it to work? Rob Title: Re: Progressive system question... Post by: brichter on May 18, 2009, 01:35:49 AM It's all in the test switch setup menu #9:
http://newlifegames.net/nlg/index.php?topic=2652.0 (http://newlifegames.net/nlg/index.php?topic=2652.0) or check your PSR. Do you know what game chip you have? Title: Re: Progressive system question... Post by: MrBellMan on May 18, 2009, 01:41:17 AM SP1145
Title: Re: Progressive system question... Post by: brichter on May 18, 2009, 02:12:20 AM :172-
Title: Re: Progressive system question... Post by: MrBellMan on May 18, 2009, 02:33:04 AM K+
Thank you very much! Title: Re: Progressive system question... Post by: brichter on May 18, 2009, 02:41:01 AM K+ Thank you very much! Gald to help. You know you're a goner now, right? You won't be happy until your progressive is bigger than a billboard. :89- :89- :89- Believe me, I bought one of those mini Photons, and from that point, it was ONNNN! I've got CHAMIs, CHAMII+es, CON1s, gateways, a CON2I, and a Supreme driving a 1x3. :5- :71- :5- My next conquest is a 2x3 display for my Supreme, haven't found one yet. Title: Re: Progressive system question... Post by: MrBellMan on May 18, 2009, 02:44:28 AM Well, I need to get this one up and running first. Do you know if I need a set chip to change option 9? Hard to tell from the other post you referred me to. I think the only set chip I have is the BV #15...
Rob Title: Re: Progressive system question... Post by: brichter on May 18, 2009, 02:57:57 AM You'll need a set chhip to enable the progressive. You won't need it to set the progressive up. The progressive enable is in group 2, zero page options that start on page 4, the setting is <0> [31], the 4th menu option on page 5.
Title: Re: Progressive system question... Post by: jay on May 18, 2009, 11:40:51 AM If you use an older game chip ie 731 you can get into option 9 without the use of a set chip.
SET90 otherwise..... |