New Life Games Tech Forums

I picked up a Bally Diamond shape topper does anyone know the hookup for this ?
The cable for the led harness has a 4 wire molex plug... being  red,blue,orange,and white
of course my S6000 has no place to hook up in the top box section for that type of molex
would be nice to know what wires get what voltage.

stormrider, pop the cover off and check the ballast for the fluorescent voltage. You might want to shoot MrBellMan a PM, he just put up a Bally Playboy bunny topper. Find out what voltages he used on his chaser lights. I believe his ballast was for 120vac.

 Dan (tacman)

Of course with the cover off, you will be able to determine which wires are for the chasers and which for the flouorescent.

Hey Dan, The ballast is 120 v then 6 wires hook into chaser board inside topper 2 going to ground
with 4 coming out to the molex for hookup solid color wires being red,blue,green and white.
I will pm him. Thanks Tim

from your picture it looks like you would hook it to where your candle is now, that's a 4 wire plug.  aren't there any other wires coming from it?

W

The 120V ballast number you stated ...is that input or output voltage?

not sure on the 120v being in or out cant see it.
as far as the connectors it has 3
1 for the candle which is 4 wire male molex
2 is the led(chaser) connector which is a 4 wire female molex
and last is a 2 wire male molex for the fl oresent bulb

I'll try to take some pics shortly

There are two different versions, AS-04952-00P1 Diamond, 110V   AS-04952-01P1 Diamond, 220V, this would be the voltage for the flourescent.  Yours is likely 120 volt, it can connect to the 120 volt connector in your top box.  I'll look further for the other connector.

Thanks,
Wayne

the led board looks to be 14 volts.  I'll let you know more soon.

Thanks,
Wayne

check your email

W

Great Thanks Wayne I'll have a look and report back...k++