Title: DBV-200 Version Question Post by: enforcer on May 22, 2009, 02:37:49 PM I am considering an upgrade of my DBV-145 to a DBV-200 for my IGT Slot. A seller I found has the DBV unit with the power supply:
DBV-200-B023 ID - 022/023 Version 2.51-04-03 I know there was a version 2.40 that accepted colored $20's and $50's, but not the gold $10 or purple $5's. Then there was a version 2.60 which supposedly accepted the gold $10's as well, but still not the purple $5's, which supposedly JCM doesn't have an upgrade for? Does anyone know if version 2.51 accepts the gold $10's ? Title: Re: DBV-200 Version Question Post by: fanninislots on May 22, 2009, 02:43:52 PM The version 2.60 will take the new 10. The version for the new 5 has not been released. Ben
Title: Re: DBV-200 Version Question Post by: stayouttadabunker on May 22, 2009, 02:52:08 PM Yeah...the casinos don't want your $5 dollar bills, only the bigger ones... :72-
Title: Re: DBV-200 Version Question Post by: Neonkiss on July 23, 2009, 08:33:25 PM I have some DBV-200 heads with the eprom chips. The newest version that I have is 2.40.05
These are SH heads with the ID 044 P / 045 P for the WMS and Bally machines. How new is the Version 2.40? and what is the version for the new color $5.00? Title: Re: DBV-200 Version Question Post by: fanninislots on July 23, 2009, 08:46:06 PM Bally and Williams share the the same ID 044/045 for the SH heads. There is an upgrade version 2.75 for the new $5. Ben
Title: Re: DBV-200 Version Question Post by: Neonkiss on July 23, 2009, 09:02:43 PM Thanks Ben.
I'll send you a PM Title: Re: DBV-200 Version Question Post by: Neonkiss on July 23, 2009, 10:42:45 PM I think I'll move my new question to the WTB section to see if anyone has one. :89-
Title: Re: DBV-200 Version Question Post by: Mdpokersupply on August 08, 2009, 09:56:01 PM What type of bills does the 2.12-04-02 (5A53) version take? The reason I ask is that I installed it in a customers S+ slant top and it still doesn't take the 20's (new or old) the machine will take 1,5,10 (old) with no problems.
Title: Re: DBV-200 Version Question Post by: Tilt on August 08, 2009, 11:29:25 PM It should take the old "small head" $20's. Check dip switch #4 on the bottom of the validator head. It should be off, if on it will reject $20's.
Title: Re: DBV-200 Version Question Post by: Mdpokersupply on August 09, 2009, 10:07:35 AM switch is off..I'm going to try and run it in test mode to see what comes up. I just got this from World Wide Gaming, so it should be taking 20's.
Title: Re: DBV-200 Version Question Post by: blueridgeslots on August 09, 2009, 12:33:05 PM What type of bills does the 2.12-04-02 (5A53) version take? The reason I ask is that I installed it in a customers S+ slant top and it still doesn't take the 20's (new or old) the machine will take 1,5,10 (old) with no problems. 2.60 is the most current for S+, hard to find the old bills that the 2.12 would work with, why even use a 200 head with that software? Title: Re: DBV-200 Version Question Post by: Mdpokersupply on August 09, 2009, 03:07:51 PM What type of bills does the 2.12-04-02 (5A53) version take? The reason I ask is that I installed it in a customers S+ slant top and it still doesn't take the 20's (new or old) the machine will take 1,5,10 (old) with no problems. 2.60 is the most current for S+, hard to find the old bills that the 2.12 would work with, why even use a 200 head with that software? Well, that's what the sticker says on the chip, but it might have a new version flashed on it...is there any way to tell what version you have on the chip (other then looking at the chip)? Title: Re: DBV-200 Version Question Post by: Mdpokersupply on August 12, 2009, 07:57:24 AM Anybody have a 2.60 chip for sale?
Title: Re: DBV-200 Version Question Post by: fanninislots on August 12, 2009, 02:56:09 PM Ya I have them give me a call 928-768-3113
|