|
Title: Dome light inop..? Post by: sommer on May 23, 2009, 04:24:15 AM lol...I never knew i have a dome light in my machine? :96- i went to one of a member home and saw that..haha.. :37-i'm not sure they call that a"Dome light"?..lol..i'm an auto mech,..
OK, any body have a wiring diag.?or know where to look? the bulb and sw,wire,connector all ck good just no power.!!not the fuse problem!! i guess they're 12V.. Thanks :131- Title: Re: Dome light inop..? Post by: stayouttadabunker on May 23, 2009, 11:26:25 PM I don't have a wiring diagram but I'll bet ya big time that that white push button white in the photo has a lot to do with it!...lol
Using a meter while set for continuity will help you determine which side of that switch is open and which 2 plugs are closed. My guess is when that switch is open (As in: when the door is physically open) the switch closes the line for the 12V to power up the "dome light". There are several sources for 12V...one for sure and very nearby is the 12V going into the DBV... :89- Title: Re: Dome light inop..? Post by: sommer on May 24, 2009, 01:46:49 AM Thanks, mark i ck, that SW, and bypass it!! i just know it? got No power? this is a simple/easy circuit..lol.."slot machine dome light",,,lucky only have to work with 1 door SW? :97- :97-
:97- :97- :97- I trace the wire down and found the connector"loose" just left it hanging/unplug?? i power up with 12V the light/SW, are working fine!!!..lol..haha.. Now i have to find where this plug go? or just find any 12V? :103- :52- :131- Title: Re: Dome light inop..? Post by: stayouttadabunker on May 24, 2009, 02:09:33 AM yeah, just use any 12V...
I know most DBV's use 12V...you have a meter at all? You can check and see if there's 12V coming out of the main power supply at all... I'm not familiar with S2000's yet... just don't use the 115V.....lol... unless you're really good with electricity and can hook up a real light bulb circuit and socket such as the ones in your home. By the way, if that red and green plug is putting out 12V, use that...just make some sort of adapter for the connector really. Use lots of elecrtical tape though, we don't want to short out anything. Title: Re: Dome light inop..? Post by: idylewild1 on May 24, 2009, 11:26:45 AM That connector goes on top of the power distribution box. In the picture with the loose connector the box is the one behind the connector and has the multi colored ribbon cable connectected. There is a two pin connector on top of that box. Hope this helps.
Title: Re: Dome light inop..? Post by: Ron (r273) on May 24, 2009, 11:33:37 AM FYI if you need a spare bulb you can pick one up at your local auto parts store #906 wedge 12V.
Ron Title: Re: Dome light inop..? Post by: sommer on May 24, 2009, 01:14:59 PM That connector goes on top of the power distribution box. In the picture with the loose connector the box is the one behind the connector and has the multi colored ribbon cable connectected. There is a two pin connector on top of that box. Hope this helps. I found it!!! thank allot!! :131- :3- cool!! the dome light still working even power sw,off [door open]..lol..just like a car..?how come they don't make this in an S+machine? :103-Thanks,,bunker and r273 :131- for part num#..lmao..that what they used for Dome light in an older Ford/Mazda Truck..!! :97- Title: Re: Dome light inop..? Post by: stayouttadabunker on May 25, 2009, 04:56:50 PM lol....glad you got it going Sommer...you know...I had a toyota corolla once...
my first car when I was 18 years old ...very used of course,... 4-on-the-floor with a clutch pedal. It had those very same looking sockets and bulbs all over the thing....lol Not to mention, a cheap coat of white paint over all the missed yellow spots too :25- |