|
Title: E-1000 MPU Swap Post by: MarkInAz on May 25, 2009, 03:35:48 PM :137- :139- My Bally 1000 series machine (1202) has a suspected bad MPU board. Can you simply swap the EPROM into a 2000 series MPU board? Or vise verse? :139- :137-
Title: Re: E-1000 MPU Swap Post by: FOXSSLOTS1 on May 25, 2009, 04:10:28 PM the P1 game proms are interchangeable - the m1,m2,m3 are not. you cannot put a e2000 mpu in a e1000 cabinet - you can put a e1000 into a e2000 but you have to bypass the reed relay on the board.
Title: Re: E-1000 MPU Swap Post by: MarkInAz on May 25, 2009, 10:37:07 PM Good karma once again to FoxSlots.
That brings up another question- in general, what do the non-game Eproms (M-1,2 & 3) do if the game is in M-7 ? :103- |