New Life Games Tech Forums

I,m trying to findout  the size of igt 17in chop top  video slot so I,ll know   how many i can fit in  truck without stacking them also  wt of same
Thanks
Steve

There's no such as a 17" chop top. There's only 9" 16", slants and round tops.

OK, assuming that you mean a 17" monitor and 9" top box that is commonly called a chop top, the the dimensions are 42.75" tall, 23.75 wide and 22.25" deep and 247 lbs.

 Dan (tacman)

I take it these are game kings or I Games, they are the measurements.  Keep in mind you can put one forward then one backwards to give more room due to the speakers hitting.

W

Good call Wayne!  :89- Yes, offset front/back to save space or just remove speakers and store in topbox.

 Dan (tacman)

 Yes I need all the room  I can get   we bought 200  of these  driffrent  games  but same  cabinets
Steve 

for that number, you'll need two trucks, probably 2 48s would do it, you'll olly be able to fit 4 across in each row, so the speakers could stay on, with the speakers off, they would be about 19 1/2 inches wide (19 plus door release and reset switch)  25 rows in each trailer.  If there are parts along with them you may want to use 53' trailers.

What kind of distance are they travelling?
Thanks,
Wayne

500 miles    i might rent  2 26ft trucks and make 2 trips   the casnio will give me a week to take them   trouble is finding space here in va  for them all    I  have a sit down game maker   that  i think has hopper turned off and a cds bingo  that needs work  but i have a new set of boards  that  I was told they where good never got time to try them I,ll take $800. for both games  , We are in stuart  va 24171 1st week of june we,ll take alot of games to a auction  that will help too
Steve

Make sure you check the weight limitations on the 26 foot trucks, I have used race car haulers but wasn't able to fill them due to the weight although the 26 footers can probably hold much more.  For me, the transport company was the easiest and most cost effective.

Thanks,
Wayne