|
Title: Switching CPU modules between 13" and 17" machines. Post by: idylewild1 on June 01, 2009, 10:18:25 PM Want to swith a CPU between a 13" and 17" machines. Is there anything special I should be aware of?? Thanks for any help.
Title: Re: Switching CPU modules between 13" and 17" machines. Post by: idylewild1 on June 03, 2009, 06:02:24 PM Am having trouble getting this to work. When I put a CPU board from the 13" into the 17" the ram clear works fine. The machine shows the current EPROM settings and then says to turn reset key to continue. Turning the reset key says to remove clear chip and reset swithes and turn machine on. I follow these instructions and when I turn the machine back on it goes throught he screen calibration procedure. After that the monitor just blinks. I know this CPU is good as I have tried it in a 13" machine and it works. Have tired chaging the mains and grapic chips from a know good board. Same results. Any help would be greatly appreciated. Thanks
|