Title: S+ Volume Post by: Jake777 on June 04, 2009, 09:44:42 PM HI All
Haven't been active for awhile, but have been in the background reading. I just got my new Hot Peppers machine and I would like to adjust the volume up. I did some searches on the site and now know I have a 16mhz board with no Blue knob. Other mentioned that it is controled from the menus, but didn't really explain the process very well. Might have to walk this newbee through step by step. Any help would be appreciated Title: Re: S+ Volume Post by: a69mopar on June 04, 2009, 11:02:21 PM Do you know what Sp(game) chip you have? these are the sp1272 settings
Group 2 -- Page Zero Options To change the option setting, press the Spin Reels button. To move to the next page zero option, turn the jackpot reset key. To move to Group 3 at any time within the zero pages, press the self test button. Reel-Spin Sound <0> [2] Options are reel-spin tones and reel-stop sounds {0} or reel-spin tones only {1}. Volume Control <0> [3] Sets the volume for all sounds and music produced by the sound generator (for the reel game). Options range from loudest volume level {1} to lowest volume level {9}. Good luck, Wayne Title: Re: S+ Volume Post by: a69mopar on June 04, 2009, 11:04:53 PM you will have to press the white test button until a 2 0 comes in the display then turn the reset key until it's 2 3.
W SELF TEST MODE The numbers enclosed in < > represent the self test page number, [ ] represent the option number, and { } represent the setting. During a tilt condition or while credits are accumulated, only the bill acceptor tilt mode and out of service mode can be modified. The self test mode consists of three groups. General instructions for setting options within groups are provided below. Specific instructions are provided where applicable. Group 1 -- Communications Options To change the option setting or to increment the digit value, turn the jackpot reset key. To change the blinking digit position, press the Spin Reels button. To move to the next self test page, press the self test button. SAS Communication Address Display<0> Displays the machine address set with the set chip. Group 2 -- Page Zero Options To change the option setting, press the Spin Reels button. To move to the next page zero option, turn the jackpot reset key. To move to Group 3 at any time within the zero pages, press the self test button. Reel-Spin Sound <0> [2] Options are reel-spin tones and reel-stop sounds {0} or reel-spin tones only {1}. Volume Control <0> [3] Sets the volume for all sounds and music produced by the sound generator (for the reel game). Options range from loudest volume level {1} to lowest volume level {9}. Title: Re: S+ Volume Post by: Jake777 on June 05, 2009, 04:31:36 PM Thanks for the info and help, I did manage to get to the volume setting after a few tries. The volume seemed low against my other machines but it was at a (1) setting. It did get softer when I increment it up. Thanks again and + kara to you.
Title: Re: S+ Volume Post by: stayouttadabunker on June 05, 2009, 09:02:55 PM Hey man!....I can get mine to go up to "11"...it kicks!!!...... :96-
Title: Re: S+ Volume Post by: jdkmunch on June 05, 2009, 11:40:13 PM Getting the volume right is 60% of slot enjoyment.
Title: Re: S+ Volume Post by: StatFreak on June 06, 2009, 01:53:44 PM Getting the volume right is 60% of slot enjoyment. What's the other 40%? You know that I just had to ask! :30- :97- :97- Title: Re: S+ Volume Post by: tacman on June 06, 2009, 02:00:39 PM Winning, of course!! :97- :97- :97-
Dan (tacman) |