New Life Games Tech Forums

**Reel Slots** Gaming Machines => WMS Reel Games. => Topic started by: karloz370 on July 02, 2009, 07:40:57 PM



Title: JACKPOT PARTY WILLIAMS 400 Power Supply
Post by: karloz370 on July 02, 2009, 07:40:57 PM
Hello new to this and need some help in finding the power supply for the jackpot party williams 400 I get nothing to work except the lights come on no display on bottom or top supply I hoping its just the bottom power supply that is needed I really miss playing my machine and any help would be greaty appreciated thanks......  :99-


Title: Re: JACKPOT PARTY WILLIAMS 400 Power Supply
Post by: knagl on July 02, 2009, 07:56:50 PM
Hello, and welcome to  :nlg-.

For starters, let's make sure your lower power supply is the problem.  Please look in the card cage and tell us which (if any) red LEDs are on when you turn the game on.  You may need to turn the game on, note which LEDs are on or off, then turn the power off and remove the card (use the levers on both sides of the card to gently pull it straight out) to read the writing on the board.  Again, make sure the power is off when you remove the card.


Title: Re: JACKPOT PARTY WILLIAMS 400 Power Supply
Post by: cfh on July 02, 2009, 10:19:51 PM
To spell it out a bit more, ALL five led's on the slot i/o board's right
side should be ON. the led at the far led (fault) should be off. if
the 5 led's at the right are not all on, you have a lower power
supply problem.


Title: Re: JACKPOT PARTY WILLIAMS 400 Power Supply
Post by: karloz370 on July 03, 2009, 07:57:09 PM
ok the light on the left is off which states Fail as for the others on the right side ds2,ds3,ds4,ds5,ds6 ------ ds2 and ds6 light is on and the others are off ds2 says =5VI and the ds6 says + 18V and for the others that are off are ds3 +12V ,ds4-12V,ds5 +5V so I am guessing the lower power supply is the problem now just need to find the power supply thanks  :25-


Title: Re: JACKPOT PARTY WILLIAMS 400 Power Supply
Post by: tacman on July 03, 2009, 08:17:17 PM
karloz370, earch the forum for cfh and other members computer power supply conversions for the WMS machines.

 Dan (tacman)


Title: Re: JACKPOT PARTY WILLIAMS 400 Power Supply
Post by: karloz370 on July 03, 2009, 08:52:48 PM
No results found


Title: Re: JACKPOT PARTY WILLIAMS 400 Power Supply
Post by: tacman on July 03, 2009, 09:14:33 PM
Here ya go!  http://newlifegames.net/nlg/index.php?topic=346.0

 Dan (tacman)


Title: Re: JACKPOT PARTY WILLIAMS 400 Power Supply
Post by: karloz370 on July 06, 2009, 01:58:27 AM
ok got the power supply problem fixed this post can be closed.... :88-


Title: Re: JACKPOT PARTY WILLIAMS 400 Power Supply
Post by: knagl on July 06, 2009, 02:06:59 AM
Congratulations!   :3-   Don't forget  :nlg- for your future slot machine needs.