|
Title: error code 3200 no hopper Post by: coxwho1 on July 11, 2009, 10:19:14 PM was plaing this triple diamond accidently hit cash out button so natuarly it went to error it is an s+ machine any way to bypass this and how do i get this 3200 cleared
Title: Re: error code 3200 no hopper Post by: jay on July 11, 2009, 11:03:22 PM Open the door and press the self test button, close the door should fix the problem.
To avoid a cashout in the future remove the wire to the Cash/Credit button. Title: Re: error code 3200 no hopper Post by: coxwho1 on July 12, 2009, 12:19:27 AM tried that it didnt work any other ideas
Title: Re: error code 3200 no hopper Post by: paul on July 12, 2009, 12:36:34 AM is there any coins in hopper if not put some in
Title: Re: error code 3200 no hopper Post by: coxwho1 on July 12, 2009, 12:40:22 AM there is no hopper in it
Title: Re: error code 3200 no hopper Post by: tacman on July 12, 2009, 12:54:51 AM That's what I thought, hence the comment, naturally giving the 3200 error when the cash out was pressed. Can't remember, can the hopper plug be jumped to fool the machine that there is one there?
Dan (tacman) Search shows one for the Bally's but I could not find anything for IGT. Title: Re: error code 3200 no hopper Post by: coxwho1 on July 12, 2009, 12:56:58 AM i wish i knew
Title: Re: error code 3200 no hopper Post by: StatFreak on July 12, 2009, 04:17:15 AM You didn't state whether you have an S+ or an S2000. There is a way to trick an S+ without a hopper into paying out using jumpers, but I don't have the details. It was posted on the old site. Perhaps someone saved the information and will repost.
Title: Re: error code 3200 no hopper Post by: knagl on July 12, 2009, 06:51:39 AM I sure don't know how to do it. One (crappy) solution would be to use a clear chip to clear the RAM, but then you'd have to set it all back up again (game options, enable bill validator, etc.).
I did the same thing on a friend's machine which used $1 tokens and he didn't have any tokens (no way to fool the optics), so I wound up doing the RAM clear to get around the machine wanting to cash out. Title: Re: error code 3200 no hopper Post by: coxwho1 on July 12, 2009, 04:01:38 PM it is an s+ triple diamond
Title: Re: error code 3200 no hopper Post by: idylewild1 on July 13, 2009, 01:10:49 AM One way to clear the error code is to remove the memory chip and ground legs using the bottom metal cabinet. Replace the memory chip and go throught he error code 61 routine and this should take care of it. The setup for the machine and the bill valadator will be okay using this method. Hope this helps.
|