|
Title: Bally 5000 + door closed sensor needed Post by: Jackpot on July 16, 2009, 05:39:55 AM I am still looking for this door closed sensor that is activated by the door lock on a Bally 5000 Plus ( This model does not have the led screen on the door). It is different then the Bally 5000 model. I think this sensor looks like a rectangular solid block with a couple wires and a plug. Thanks
Jackpot :151- Title: Re: Bally 5000 + door closed sensor needed Post by: stayouttadabunker on July 16, 2009, 11:18:08 AM Can you post a picture of it?
I may have what you're looking for.... :89- Also, you'll be noticed more if you post what you want in our NLG "Classified" section... :88- Title: Re: Bally 5000 + door closed sensor needed Post by: Jackpot on July 17, 2009, 05:07:29 PM There are two different door senors on the Bally 5000 and the 5000 plus. I don't have a photo of the senor that I need for the 5000 Plus, but I have a photo of the one that I don't need off a Bally 5000, it's attached. So if it looks like this one in the photo, it's the wrong one. Sorry..... I'll keep looking for the bad one and take a photo of it if I can locate it. thank You
Jackpot :25- :103- Title: Re: Bally 5000 + door closed sensor needed Post by: stayouttadabunker on July 17, 2009, 05:11:55 PM I wonder if it's just a bad ground wire and NOT the sensor? :128-
Use a multimeter and check for continuity among the sensors' wiring and see if they're all okay. :103- Jiggle the molex connectors too...unplug it and plug it back together...sometimes that'll get the circuit going again... :89- Hey, reminds me of that guy fixing the black lines on his big plasma TV with a baseball bat.... :72- Title: Re: Bally 5000 + door closed sensor needed Post by: Jackpot on July 17, 2009, 05:44:09 PM Here the deal..... I removed the sensor because it had a door open code and would not go away. So then, I ran a jumper wire to put it in the door closed mode all the time. It was fine for a long time. but now I been getting a call back on it, he said that everything will be fine and then out of the blue it just goes into a door open code. So, you are right.. and I'll put that Bat away next time and pick up the meter, Maybe I need to go back out and find the intermittent ground or lose wire causing this. I was hoping to put a good door sensor back into it when I did, as it a friends machine and it's located out of town. Last time I was there I had no tools to work with, so I did the best I could for him by jumping it. Thank You!, and you caught me?
Jackpot :58- Title: Re: Bally 5000 + door closed sensor needed Post by: stayouttadabunker on July 17, 2009, 06:01:06 PM oh that's okay....just trying to help...
Hey, did you try any of our vendors listed on top here? These greats guys and gals have just about everything you need or are looking for.... :89- |