|
Title: lower door glass removal on Universal? Post by: rjpohl on July 19, 2009, 08:59:28 PM I can't seem to get the glass off so that I can change lower bulb. I have removed the 2 outer screws on the bottom and loosened the 2 inner screws per page 45 of manual. I then tried lifting glass frame up but it just won't come out. Can anyone help with this?
thanks Bob Title: Re: lower door glass removal on Universal? Post by: tacman on July 19, 2009, 09:07:04 PM Bob, check out this thread: http://newlifegames.net/nlg/index.php?topic=855.0
Dan (tacman) Title: Re: lower door glass removal on Universal? Post by: rjpohl on July 19, 2009, 09:18:08 PM Hi Tacman
Thanks for the thread, I'll work on it a little more tomorrow night. I may have messed up because I had removed all 4 screws on the top and also all 4 on the bottom before reading manual. In any case the glass frame will lift up but not enough to come out. Bob Title: Re: lower door glass removal on Universal? Post by: Randy0777 on July 21, 2009, 12:15:51 AM Bob,Im not sure because my Universal is different,however,after reading the link Dan posted... The Sigma 150's are about the same,but when I tried to get it off I played hell :37- . Come to find out they put the double face tape on it to seal it from drinks,which I could not see. Anyway,if all else fails...try prying it off GENTLY :97-
Title: Re: lower door glass removal on Universal? COMPLETED!!! Post by: rjpohl on July 23, 2009, 11:29:17 AM thanks Randy it did take a little prying but it did break loose and all is well now.
Karma to you and tacman Title: Re: lower door glass removal on Universal? Post by: tacman on July 23, 2009, 07:42:13 PM Glad to hear it Bob!! :3- Lets try not to use that word "break" too often though! :5-
Dan (tacman) Title: Re: lower door glass removal on Universal? Post by: rjpohl on July 23, 2009, 08:16:30 PM thanks for the good advise!
Title: Re: lower door glass removal on Universal? Post by: Randy0777 on July 25, 2009, 08:36:37 AM LOL,Bobl...Dont thank me. If it was not for Uniman, (and Dan posting that link) I would not even be in this section :97- Anyway,I'm glad you got it off :3-
Title: Re: lower door glass removal on Universal? Post by: rjpohl on July 25, 2009, 10:58:45 AM thanks, looks like I owe a few more Karnmas (Dan and Uniman). Uniman has helped out several times on Universal machines.
Title: Re: lower door glass removal on Universal? Post by: uniman on July 25, 2009, 12:29:56 PM Bob, I saw your post after Randy and Dan gave direction. Nice to see others jump in on Uni problems! Thanks guys! :89-
Those belly glass frames can be tough to get off sometimes. |