|
Title: Bally E2000 Slot "Chatter" Post by: beatles63 on July 22, 2009, 12:33:36 PM Ran into something on a E2000 Series slot I had not seen before. When the door is open I have a code of 8300xxx where xxx can be all zeros or changes its values. I can run the diagnose test successfully with the switch,, hopper, display, and reel tests working fine. The big problem is when I close the door switch all of the coils start pulling in and out (chattering). Anyone have any thoughts?
Title: Re: Bally E2000 Slot "Chatter" Post by: FOXSSLOTS1 on July 22, 2009, 02:06:09 PM you may have a light socket on the door that is grounding to the cabinet - put a newspaper in the door to sandwich between the door and the cabinet - see if the chattering goes away - if it does - use the paper in smaller areas to isolate the area where the short is. If the paper does not do the trick - reseat the edge connector on the power supply.
Title: Re: Bally E2000 Slot "Chatter" Post by: beatles63 on July 23, 2009, 01:28:35 AM Thanks for the info...I will check into it...
|