|
Title: S6000 solenoid for drop door keeps cycling Post by: rjpohl on August 10, 2009, 10:17:49 PM After performing a safe ramclear the solenoid for the drop door keeps pulling in and out every 3 or 4 seconds. Any ideas on what could be causing this? It is a coinless machine, not coin optics or hopper. I have replace both door and cabinet optics and the solenoid valve.
Title: Re: S6000 solenoid for drop door keeps cycling Post by: a69mopar on August 11, 2009, 12:32:45 AM Hi Bob,
Is everything else working on this? dooes the game initialize? does this happen when the door is closed or open? Door optics would have been my first area of investigation, I would check the wiring on the door and make sure there aren't any shorts, I would also remove the reels, and remove and reseat all connections to the backplane (mother) board. Thanks, Wayne |