|
Title: backlit reel board picture Post by: jstraa on August 13, 2009, 05:55:37 PM hi,
Does anyone have a backlit reel board photo? My wires from the power supply are cut and I want to know in which order to install them in the new plug, I would love a picture to avoid mistakes. Thanks, Jeroen Title: Re: backlit reel board picture Post by: Ron (r273) on August 13, 2009, 08:29:03 PM hi, Does anyone have a backlit reel board photo? My wires from the power supply are cut and I want to know in which order to install them in the new plug, I would love a picture to avoid mistakes. Thanks, Jeroen Not sure this will help but here are a couple old pictures. (without cover) If you need a pin out I can pull one of mine and give you the numbers. Ron Title: Re: backlit reel board picture Post by: jstraa on August 13, 2009, 08:51:30 PM Ron do you have any idea what's the molex part number of the power cable (from the power supply) it's a 2 row 6 pin male molex.
Thanks, Jeroen Title: Re: backlit reel board picture Post by: Ron (r273) on August 13, 2009, 10:21:51 PM Ron do you have any idea what's the molex part number of the power cable (from the power supply) it's a 2 row 6 pin male molex. Thanks, Jeroen Sorry I don't. Maybe someone else is familiar with those Molex numbers. Ron Title: Re: backlit reel board picture Post by: idesign on August 14, 2009, 10:19:45 AM The power connector on the 3 reel controller is J3.
Pin 1 is 25 v Pins 2 & 3 are 13V Pins 4-6 are all ground. See partial schematic below. Title: Re: backlit reel board picture Post by: tradulovich on August 14, 2009, 01:44:19 PM Jeroen if you take a picture of exactly what you want info on I will take a picture of my boards with all wires connected and I hope it helps you. let me know. Tim
|