|
Title: DIY LCD Kit info needed Post by: MrBellMan on August 15, 2009, 09:43:40 PM Hi all,
I came across this LCD/Touch screen kit (see pics) and was curious to know if anyone has any info on it? It appears to be home made and complete, but I'm not sure how I would plug it into one of my I Games (19 pin). I know nothing about this and I'm mot even sure if it works. Anyone have any info on the pin outs or info at all? Thanks, Rob Title: Re: DIY LCD Kit info needed Post by: MrBellMan on August 15, 2009, 09:44:06 PM Two more pics...
Title: Re: DIY LCD Kit info needed Post by: fiddlefarter on August 17, 2009, 12:33:36 AM This monitor is familiar I have repaired them before but have no schematics, I will have a look at one of mine and see if I can help. Is the monitor powering up ?
Title: Re: DIY LCD Kit info needed Post by: MrBellMan on August 17, 2009, 12:37:53 AM Thanks for the reply,
Since I have nothing to plug it into (matching plug wise), I'm not sure if it will power up or not. I was hoping someone recognized the hardware and would be able to tell me how to change the pin configuration or perhaps have an adapter for an I-Game 19 pin. Rob Title: Re: DIY LCD Kit info needed Post by: fiddlefarter on August 17, 2009, 12:41:26 AM No worries I will check the pin outs on mine and get back to you tomorrow
Regards Sharron Title: Re: DIY LCD Kit info needed Post by: fiddlefarter on August 20, 2009, 12:37:49 AM I have searched my workshop for a similar LCD and it seems pixies have taken the boards and left me with the frame. From memory the monitor runs from
a standard VGA (pin outs can be obtained from the net), I would remove the cable that is there and make my own. I believe that this monitor is powered via external DC power supply, (12V DC or 24V DC) which looks like it is to the right of the touch screen board, (check + and -). The 2 wires coming from the touch screen assembly you will find are tapping into 12V at some point on the board. I will have a really good look around and see what else I can find there seems to be no service info on this model. I test all of my LCD's using a VGA cable that is run off my computer, and have at least 2 power supply units always on. Regards Sharron Title: Re: DIY LCD Kit info needed Post by: MrBellMan on August 21, 2009, 01:39:37 AM Thanks for the info and please let me know if you find any thing else useful.
Rob Title: Re: DIY LCD Kit info needed Post by: fiddlefarter on August 24, 2009, 01:21:31 AM It is very frustrating to know that I have worked on that unit and to see the case and boards missing :37-, if I do find anything I will post it for you
Regards Sharron Title: Re: DIY LCD Kit info needed Post by: vtyler on August 20, 2011, 02:01:54 AM sorry for resurrecting a old topic but i actually have been working with one of these LCD for a project of mine and i do have a pin-out for everything but the touch controller if it is still needed
|