|
Title: C57 position on board s2000 Post by: U.S.AutoService on August 16, 2009, 09:39:48 PM I have a question :103- about position c57 on my motherboard ( is it called a mother board ?) it only has 2 little 1/2 inch silver rods sticking out on the board. All my other boards have a little blue or black can there. Is it broken ? the thing boots up but says call attendant, junk it or what ?
By the way, is there a quick fix for "primary sas down" ? that machine was working good till it tried to pay out coins and print tickets over the limit .... Dan Title: Re: C57 position on board s2000 Post by: Ron (r273) on August 17, 2009, 11:30:58 AM I have a question :103- about position c57 on my motherboard ( is it called a mother board ?) it only has 2 little 1/2 inch silver rods sticking out on the board. All my other boards have a little blue or black can there. Is it broken ? the thing boots up but says call attendant, junk it or what ? By the way, is there a quick fix for "primary sas down" ? that machine was working good till it tried to pay out coins and print tickets over the limit .... Dan C57 is on the MPU Board (Micro Processor Unit) or main board. It is a25V, 470MFD capacitor. Maybe someone can help you replace it, sorry I can't. There is no quick way but the easest way for me to correct "Primary SAS Down" is to install a new game and set it up to play. Then replace it with the original game. Ron Title: Re: C57 position on board s2000 Post by: idylewild1 on August 17, 2009, 11:58:00 AM For the primary system down error. I always clear memeory and reset with a key17 chip. Hope this helps.
|